Current Category
Garden 4mm Fittings

	4.5mm Barbed Connector These joiners are barbed on both ends and are used to join our 4mm flexible tubing.		Price:	QTY:

	4.5mm Barbed Connector - Bag of 100 Used to connect 4 flexible tube to the 13/19/25mm low-density poly supply line.   Also used to connect 3/5 flexible tube to 3/5 flexible tube.   This is the bulk 100 pieces bag.		Price:	QTY:

	4mm Barbed Elbow To make a sharp 90 degree turn in 4mm flexible tube, use an elbow.		Price:	QTY:

	4mm Barbed Elbow - Bag of 50 To make a sharp 90 degree turn in 4mm flexible tube, use an elbow.   This is the 50 piece bag.		Price:	QTY:

	4.5mm Tee - All barbed ends Used to connect 4mm flexible tube in a "T" configuration.		Price:	QTY:

	4.5mm Tee - All barbed ends - Bag of 50 Used to connect 4mm flexible tube in a "T" configuration.   Bag of 50 pieces.		Price:	QTY:

	4mm Barbed In-Line Tap - Variable Flow A 4mm in-line tap can be installed anywhere on the 4mm flexible tube to provide on/off or to allow adjustment to pressure and flow of a sprinkler or spray.   These taps are barbed and will only fit the 4mm flexible tubes, they will not fit into the rigid risers.		Price:	QTY:

	4mm Barbed In-Line Tap - Variable Flow - Bag of 50 A 4mm in-line tap can be installed anywhere on the 4mm flexible tube to provide on/off or to allow adjustment to pressure and flow of a sprinkler or spray.   These taps are barbed and will only fit the 4mm flexible tubes, they will not fit into the rigid risers.      This bag has 50 taps.		Price:	QTY:

	4mm Goof Repair Plugs Rack of 10 Goof plugs are used to block unwanted holes in low-density poly tube.   The 4mm goof plug will block any hole less than 4mm in diameter such as most of those made by removing a rigid riser spray.   The goof plug is supplied in racks of 10, so if you order 3 you will receive 3 x racks of 10 plugs.		Price:	QTY:

	4mm Jet Punch & Spanner Used to punch the correct size hole into low-density poly pipe for all 4mm connectors, stake adaptors and all on-line drippers.		Price:	QTY:

	4mm Mounting Clips with Nail These clips are used to secure 3/5mm and 4mm flexible tube to timber frames in greenhouses or along the balcony or fence.		Price:	QTY:

	4mm Mounting Clip with Nail - Bag of 100 These clips are used to secure 3/5mm and 4mm flexible tube to timber frames in greenhouses or along the balcony or fence.   This is a bag of 100 pieces.		Price:	QTY:

	4mm Rigid Riser x 300mm - Bag of 20 This is a 300mm high rigid 4mm riser tube that comes with a threaded adaptor in the end to punch directly into low-density poly pipe.   Although we supply thousands of  these risers, I always recommend to customers that they use the Micro Stake with tube and adaptor if possible, as it is a far more practical and robust item that is more difficult to dislodge and allows you to move the spray/sprinkler away from the supply line if required.    This is a bag with 20 x risers.		Price:	QTY:

	4mm Rigid Riser x 200mm - Bag of 20 This is a 200mm high rigid 4mm riser tube that comes with a threaded adaptor in the end to punch directly into low-density poly pipe.   Although we supply thousands of  these risers, I always recommend to customers that they use the Micro Stake with tube and adaptor if possible, as it is a far more practical and robust item that is more difficult to dislodge and allows you to move the spray/sprinkler away from the supply line if required.    This is a bag with 20 x risers.		Price:	QTY: